|
Options & Accessories
Alternate Door Skin Material
0.063" clear satin anodized aluminum - standard on Type 1 and Type 2 doors
0.090" clear satin anodized aluminum - recommended for large doors to improve stability
-
must be accompanied by extruded aluminum edge (see "Edge Options")
18 gauge stainless steel - must be accompanied by extruded aluminum edge (see "Edge Options")
Edge Options
 |
Formed - standard on Type 1 and Type 2 doors available in 0.063" aluminum door skin only. |
 |
Extruded Aluminum - available only on swing edge |
| |
- same extruded aluminum that is standard on the Type 2 door hinge edge
- recommended for large doors to improve stability |
 |
Neoprene Rubber (double layer) - available only on top, bottom and swing edge |
| |
- recommended for doors that seperate clean rooms from dirty or dusty rooms |
Windows
8 - 1 / 2" x 11" Plexiglas© - standard on Type 1 and Type 2 doors
Also available:
- diamond hole pattern
- square hole pattern
- 6" x 34"
- 12" x 12"
- 12" x 20"
- 15" x 20"
- 18" x 18"
- consult factory for other sizes
Kickplates
Kickplates are recommended for high traffic areas or where small carts are used. Kickplates are riveted to the door skin and may be used on one or both sides of the door. Available kickplate materials are listed below.
| - Stainless steel |
- 16 gauge, 18 gauge, or 20 gauge |
| - Aluminum |
- 13 gauge or 16 gauge |
| - Galvanized Steel |
- 16 gauge, 18 gauge, or 20 gauge |
| - Aluminum treadplate |
- 1 / 16", 1 / 8" |
| - Thermoplastic rubber |
- 1 / 4" |
| - Stainless steel pushplates |
- 20 gauge |
Laminate Coverings
Formica, Nevamar, and Wilsonart available in hundreds of colors and patterns. Consult factory for availability.
Locking Devices
| Hasp - used with padlock or combination lock |
| Reinforced lock hole - used with chain lock |
| Cane bolt - can be used to lock door in place either open or closed |
Bumpers
| Aluminum or cart bumper strip - can be installed to accommodate any cart height |
| Teardrop bumpers - recommended for high impact applications |
| |
- will absorb most of impact energy and protect door and hinges |
| |
- available in aluminum or thermoplastic rubber |
Jambguards
| - recommended for use in powered cart or forklift applications |
| - constructed of heavy-duty steel and powder-coated or painted for appearance. Also available in zinc-coated. Protects hinges from damage caused by rolling carts. |
Replacement Parts
Replacement parts are available for hinges and windows.
Custom Design Doors
Carlson's engineering department can help in designing doors to fit your exact application. Contact the factory for assistance in the design of your custom doors.
Type 1 Door Specification
Double-acting aluminum traffic doors are manufactured by Carlson Products in Maize, Kansas to fit the finished opening size designated by the customer. Doors have satin anodized aluminum body. Hinges are self-closing, spring butt hinges attached directly to the aluminum spine. Special options are listed seperately.
Type 2 Door Specification
Double-acting aluminum traffic doors are manufactured by Carlson Products in Maize, Kansas to fit the finished opening size designated by the customer. Doors have satin anodized aluminum body and extruded aluminum spine riveted to body. Hinges are gravity-activated offset pivot hinges attached directly to the extruded aluminum spine. Special options are listed seperately.
Warranty
Carlson doors installed in accordance with manufacturer's printed instructions or shop drawings are guaranteed against defects in materials and workmanship for a period of one year from date of installation. Defective parts may be returned to Carlson Products, freight pre-paid, for repair or replacement. The decision of repair versus replace is at the discretion of Carlson Products. This guarantee does not cover damage done by others. And this guarantee does not cover labor or material costs incurred by reinstallation of repaired or replaced parts.
If you are interested in any of our products, email sales@carlsonproducts.com.
|
