Options & Accessories

Alternate Door Skin Material

0.063" clear satin anodized aluminum - standard on Type 3 and Type 3A doors
0.090" clear satin anodized aluminum - recommended for large doors to improve stability
18 gauge stainless steel

Alternate Door Thickness

1-1 / 4"-standard on Type 3 and 3A

Windows

8 - 1 / 2" x 11" Plexiglas - standard on Type 3 and Type 3A doors
Also available:

• 6" x 34"
• 12" x 12"
• 12" x 20"
• 15" x 20"
• 18" x 18"
• consult factory for other sizes

Kickplates

Kickplates are recommended for high traffic areas or where small carts are used. Kickplates are riveted to the door skin and may be used on one or both sides of the door. Available kickplate materials are listed below.

Laminate Coverings

Formica, Nevamar, and Wilsonart available in hundreds of colors and patterns. Consult factory for availability.

Locking Devices

Bumpers

Jambguards

Replacement Parts

Replacement parts are available for hinges, windows, and gasket seals.

Custom Design Doors

Carlson's engineering department can help in designing doors to fit your exact application. Contact the factory for assistance in the design of your custom doors.

Type 3 Door Specification

Double acting aluminum traffic doors to be Carlson Products Type 3 manufactured by Carlson Products in Maize, Kansas to fit finished opening size designated by customer. Doors to have satin anodized aluminum skin on both sides riveted to an extruded aluminum frame with an overall door thickness of 1-1 / 4". Core to be expanded polystryrene or high-density urethane. Doors to also have full perimeter, replaceable, neoprene double-wiper gasket with the bottom gasket being adjustable for floor clearance. Hinges to be gravity-activated offset pivot hinges for gentle closing. Special options will be listed separately.

Type 3A Door Specification

Double-acting insulated cooler doors to be Carlson Products Type 3A manufactured by Carlson Products in Maize, Kansas to fit finished opening size designated by customer. Doors to have satin anodized aluminum skin on both sides riveted to an extruded aluminum frame with an overall door thickness of 1-1 / 4". Core to be expanded polystryrene or high density urethane. Doors to also have full perimeter, replaceable, neoprene double-wiper gasket with the bottom gasket being adjustable for floor clearance. Hinges to be self-closing spring butt hinges attached directly to the extruded aluminum frame. Special options will be listed separately.

Warranty

Carlson doors installed in accordance with manufacturer's printed instructions or shop drawings are guaranteed against defects in materials and workmanship for a period of one year from date of installation. Defective parts may be returned to Carlson Products, freight pre-paid, for repair or replacement. The decision of repair versus replace is up to the discretion of Carlson Products. This guarantee does not cover damage done by others. This guarantee does not cover labor or material costs incurred by reinstallation of repaired or replaced parts.

If you are interested in any of our products, email sales@carlsonproducts.com.