|
Composite Door Options
Interior Construction
- Solid structure with foam core is standard
- Solid core available
Windows
- 12"x20" Plexiglass - standard on Type 7, Type 7A and Type 7B doors
| Also available: |
|
- 12"x12"
- 15"x20"
- Consult factory for other sizes
|
Kickplates
Kickplates are recommended for high traffic areas or where small carts are used.
Kickplates are riveted to the door skin and may be used on one or both sides of the
door. Available kickplate materials are listed below:
| Stainless Steel |
16 gauge, 18 gauge or 20 gauge |
| Aluminum |
13 gauge or 16 gauge |
| Galvanized Steel |
16 gauge, 18 gauge or 20 gauge |
| Aluminum treadplate |
1/16", 1/8" |
| Thermoplastic rubber |
1/4" |
| Stainless steel pushplates |
20 gauge |
Locking Devices
- Hasp - used with padlock or combination lock
- Reinforced lock hole - used with chain lock
- Cane bolt - can be used to lock door in place either open or closed
Bumpers
- Aluminum cart bumper strip - can be installed to accommodate any cart
height
- Teardrop Bumpers
- Recommended for high impact applications
- Will absorb most of impact energy and protect door and hinges
- Available in aluminum and thermoplastic rubber
Jambguards
- Recommended for use in powered cart or forklift applications
- Constructed of zinc-plated heavy duty steel
- Protects hinges from damage caused by rolling carts or powered trucks
Hinges
- Low profile gravity hinge standard
- Clamp flange spring hinge
- Full-length extruded hinge mount with V-cam hinge
Replacement Parts
Replacement parts are available for hinges, windows and gasket seals.
Custom Design Doors
Carlson's engineering department can help in designing doors to fit your exact
application. Contact the factory for assistance in the design of your custom doors. |
