|
Alternate Door Skin Material
- 0.063" clear satin Anodized Aluminum - standard on Type 4 and Type 4A doors
- 0.090" clear satin Anodized Aluminum - recommended for large doors to improve
stability
- 18 gauge stainless steel
Alternate Door Thickness
- 1-1/4"-standard on Type 4 and Type 4A
- 2"-recommended for applications with higher temperature differential
Windows
- 8-1/2"x11" Plexiglass - standard on Type 4 and Type 4A doors
| Also available: |
|
- 12"x12"
- 15"x20"
- Consult factory for other sizes
|
Kickplates
Kickplates are recommended for high traffic areas or where small carts are used.
Kickplates are riveted to the door skin and may be used on one or both sides of the
door. Available kickplate materials are listed below:
| Stainless Steel |
16 gauge, 18 gauge or 20 gauge |
| Aluminum |
13 gauge or 16 gauge |
| Galvanized Steel |
16 gauge, 18 gauge or 20 gauge |
| Aluminum treadplate |
1/16", 1/8" |
| Thermoplastic rubber |
1/4" |
| Stainless steel pushplates |
20 gauge |
Laminate Coverings
Formica, Nevamar, and Wilsonart available in hundreds of colors and patterns.
Consult factory for availability.
Locking Devices
- Hasp - used with padlock or combination lock
- Reinforced lock hole - used with chain lock
- Cane bolt - can be used to lock door in place either open or closed
Bumpers
- Aluminum cart bumper strip - can be installed to accommodate any cart
height
- Teardrop Bumpers
- Recommended for high impact applications
- Will absorb most of impact energy and protect door and hinges
- Available in aluminum and thermoplastic rubber
Jambguards
- Rcommended for use in powered cart or forklift applications
- Constructed of zinc-plated heavy duty steel
- Protects hinges from damage caused by rolling carts or powered trucks
Replacement Parts
Replacement parts are available for hinges, windows and gasket seals.
Custom Design Doors
Carlson's engineering department can help in designing doors to fit your exact
application. Contact the factory for assistance in the design of your custom doors.
|
